Specifications and model checks

Nameplate capacity100 Ah at 12 V
Usable capacity80 Ah at 80% depth of discharge
ChemistryLiFePO4 (lithium iron phosphate)
Pack weight11.5 kg
BMS continuous discharge100 A
Claimed cycle life2,500 cycles at 80% DoD
Warranty5 years
Bluetooth monitoringYes
Low-temperature charge cut-offYes
Our bench statusclaimed

This is a brand-and-capacity planning profile, not a verified SKU specification. Confirm the exact model, current datasheet, permitted boat application and warranty with the supplier. Boat Battery has not independently bench-tested this battery. See how we test.

Suitable boat applications

Offshore boats where the nearest workshop is a long way away.

Compatibility limits to check

You are west of Adelaide and want a dealer you can drive to.

For the brand as a whole — support network, documentation and where it falls short — read the Invicta review.

Before buying a 12V 100Ah Invicta battery

Ask for the exact model code and installation manual. Confirm the case fits through the compartment opening with clearance for terminals, cable bends and restraint. Check permitted mounting orientation and environmental limits; capacity alone does not establish suitability for a boat.

Match the battery’s continuous and surge discharge limits to your largest loads, then verify the combined charging current and the response to a BMS disconnect. For multiple packs, obtain the manufacturer’s series or parallel instructions before designing the bank.


On these boats

Boat applications for this battery capacity


At the same capacity

Compare 12V 100Ah lithium battery alternatives

BatteryPrice bandPer usable AhWarrantyBench
iTechworld 12 V 100 Ah$450–$650$6.883 yrclaimed
KickAss 12 V 100 Ah$550–$780$8.313 yrclaimed
Renogy AU 12 V 100 Ah$600–$850$9.065 yrclaimed
Amptron 12 V 100 Ah$680–$950$10.195 yrclaimed
Revolution 12 V 100 Ah$700–$950$10.314 yrclaimed
Enerdrive 12 V 100 Ah$950–$1,300$14.065 yrclaimed

Turn the estimate intoan installation plan.

Take the load estimate, charging sources and cable runs to a qualified marine electrician. Our installation guide helps you ask about isolation, over-current protection, ventilation and compliance before work begins.