Specifications and model checks

Nameplate capacity200 Ah at 12 V
Usable capacity160 Ah at 80% depth of discharge
ChemistryLiFePO4 (lithium iron phosphate)
Pack weight23 kg
BMS continuous discharge200 A
Claimed cycle life2,000 cycles at 80% DoD
Warranty5 years
Bluetooth monitoringYes
Low-temperature charge cut-offYes
Our bench statusclaimed

This is a brand-and-capacity planning profile, not a verified SKU specification. Confirm the exact model, current datasheet, permitted boat application and warranty with the supplier. Boat Battery has not independently bench-tested this battery. See how we test.

Suitable boat applications

A 400–600 Ah house bank assembled from two or three cases.

Compatibility limits to check

Budget is the binding constraint and the boat sees a fortnight a year.

For the brand as a whole — support network, documentation and where it falls short — read the Enerdrive review.

Before buying a 12V 200Ah Enerdrive battery

Ask for the exact model code and installation manual. Confirm the case fits through the compartment opening with clearance for terminals, cable bends and restraint. Check permitted mounting orientation and environmental limits; capacity alone does not establish suitability for a boat.

Match the battery’s continuous and surge discharge limits to your largest loads, then verify the combined charging current and the response to a BMS disconnect. For multiple packs, obtain the manufacturer’s series or parallel instructions before designing the bank.


On these boats

Boat applications for this battery capacity


At the same capacity

Compare 12V 200Ah lithium battery alternatives

BatteryPrice bandPer usable AhWarrantyBench
iTechworld 12 V 200 Ah$850–$1,200$6.413 yrclaimed
KickAss 12 V 200 Ah$1,050–$1,450$7.813 yrclaimed
Renogy AU 12 V 200 Ah$1,150–$1,600$8.595 yrclaimed
Amptron 12 V 200 Ah$1,250–$1,700$9.225 yrclaimed
Revolution 12 V 200 Ah$1,350–$1,800$9.844 yrclaimed
Invicta 12 V 200 Ah$1,700–$2,300$12.505 yrclaimed

Turn the estimate intoan installation plan.

Take the load estimate, charging sources and cable runs to a qualified marine electrician. Our installation guide helps you ask about isolation, over-current protection, ventilation and compliance before work begins.