Specifications and model checks

This profile identifies a brand and rating or model family. Confirm the precise variant and current datasheet; voltage, monitoring and environmental limits can vary between versions.

Charge current60 A
Input12/24 V
Lithium profileYes
MonitoringBluetooth

Suitable boat applications

A 150 A alternator feeding a 600 Ah or larger bank.

Compatibility limits to check

Your alternator is under 120 A — this asks it for more than it can sustain all day.

For how to size this against your own boat rather than against a spec sheet, read dc-dc chargers.

Sized for your boat

40 A

Charge current for a 400 Ah bank on a 90 A alternator

This is a ceiling, not a target. A charger larger than your alternator can sustain is the failure this whole page exists to prevent, so we list what fits at or under it — biggest first.

5 options fit — the first is the one we would fit

Before choosing Victron 60 A

Match the charger to the installed charging system

Check the input source, battery requirements and the alternator’s available continuous output under actual operating conditions. Include other engine electrical demand in the assessment. Maximum charger output is not a promise of output at every temperature or speed, and the design needs to account for control signals and protection behaviour as well as current.

Confirm specifications against the exact model and revision offered by the supplier. A listed price band is a planning reference; request a current written quote with installation and commissioning separated from equipment supply.


The rest of the category

ProductCharge currentPrice band
Victron 18 A18 A$230–$340
Redarc 25 A25 A$390–$550
Victron 30 A30 A$380–$540
Redarc 40 A40 A$520–$720
Enerdrive 40 A40 A$590–$800
Redarc 50 A50 A$680–$920
Victron 50 A50 A$720–$980

Turn the estimate intoan installation plan.

Take the load estimate, charging sources and cable runs to a qualified marine electrician. Our installation guide helps you ask about isolation, over-current protection, ventilation and compliance before work begins.