Head to head
Victron Phoenix 1200VA vs Enerdrive ePower 2000W
Both do the same job. The question is which one your boat is actually asking for — and on this site that is a number, not a preference.
| Victron Phoenix 1200VA inverter | Enerdrive ePower 2000W inverter | |
|---|---|---|
| Continuous output | 1000 W | 2000 W |
| Price band | $450–$650 | $1,100–$1,550 |
| Best suited to | Cruising yachts running occasional 240 V rather than living on it. | Cruising yachts that want a kettle and a microwave without a refit. |
| Look elsewhere if | You want to run an induction hob or a microwave and a kettle together. | Your loads are a laptop and a phone — 1200 W would do it for less. |
Victron Phoenix 1200VA inverter
The 1200VA model is rated at 1000W continuous at 25°C. Check appliance watts and starting demand; many household kettles exceed its output.
Enerdrive ePower 2000W inverter
The middle size, marine-documented, and the one most 38-footers end up with.
The honest answer
Size it first, then choose.
A head-to-head between two ratings is the wrong question if neither matches your boat. Work out what the boat needs, then pick between whatever meets it — which is usually a decision about support and documentation rather than about amps.
Before choosing Victron Phoenix 1200VA inverter and Enerdrive ePower 2000W inverter
Inverter output, idle consumption and battery limits
Compare continuous output and startup demand against the appliances you actually intend to run. Then account for idle consumption during the hours the inverter remains enabled. The bank, protection and cabling must support the design together; a large inverter label does not establish that an existing battery installation can supply it.
Confirm specifications against the exact model and revision offered by the supplier. A listed price band is a planning reference; request a current written quote with installation and commissioning separated from equipment supply.